Description:
Every watercooled VW needs an oil cooler other than the factory unit. Volkswagens simply run too hot of an oil temperature in stock form. A high-output engine in a cramped engine compartment can generate a lot of heat. Not only do high engine temperatures contribute to lubricant breakdown, they also contribute to a shorter engine life and/or loss in overall horsepower.

A properly installed oil cooler will give your car extra thermal cooling to keep heat under control during periods of peak demand. Oil lubricates best in the range of 180° to 212° F. Below this temp, the oil isn't hot enough to burn off harmful contaminants. Temps above 230°F, it starts to thin out and oxidize, reducing lubrication significantly. The Mocal thermostatic sandwich plates return oil to the engine when it's below 180°F, allowing the engine to warm up quickly. Once warm, the thermostat opens, and the oil flows to the cooler to keep temperatures within the ideal range.


Kit includes:

• (1) Mocal Sandwich Plate thermostatic
• (2) 1/2" x -10an unions
• (2) 1/2" sealing washers
• (8') 5/8" i.d. hose stainless FBA1000
• (2) 90 degree hose ends
• (2) straight hose ends
• (2) adell clamps
• (2) oil cooler strap/bracket
• (1) assorted hardware nuts/bolts

NOTE: Be sure to pick out your oil cooler heat exchanger for a complete bolt on kit!